Here, I will continue my topic about of Surge Arrestor Box for Mikrotik Wireless Radio. Now, I will share information for you how to installation its. For more detail installation, see below :


Step 1 : Installation of Surge Arrestor Box.

Install the Surge Arrestor Box at the pole antenna. Its position is behind of Mikrotik devices, so data cable lets to short for used them. Make sure the data cable from Mikrotik devices and from Switch devices has connected to APC Surge Protector PNET1 devices. For more detail how to installation, see the picture 1 below :



















Picture 1. Installation of data cable


Step 2 : Connection of Grounding Cable.

After installation of data cable, please make sure the grounding cable has connected to copper plate of the surge protector box. This is very important. Don't forget to do it. For more detail how to installation, please see the picture 2 below :

Picture 2. Installation of grounding cable


Step 3 : Connection of grounding cable to grounding bus bar.

Next step, you must be connect of grounding cable to grounding bus bar. For more detail how to do it, see the picture 3 below :



















Picture 3. Connection of grounding cable to grounding bus bar


Step 4 : Finish the installation.

The finishing, make sure of connection for all of them. If the connection has the better, the work has finished. See the picture 4.

























Picture 4. Result of work

If you like this concept, please try its...

For more detail information for Mikrotik Product, you can read here
For more detail information for APC Product, you can read here
For more detail information for Grounding Components, you can read here